Electrical Engineering · Question Bank

circuits

301 questions · page 7 of 16. Answer in your head first, then check the solution.

#121
The electric field strength between capacitor plates has a unit of
Avolts per meter
Bvolts per mil
Camperes per meter
Damperes per mil
#122
For multi-plate capacitor, capacitance is proportional to
Anumber of plates less than one (n-1)
Bnumber of plates plus one (n+1)
Cnumber of plates less two (n-2)
Dnumber of plates (n)
#123
A capacitor consists of two
Aconductors only
Bdielectric only
Cconductors separated by a dielectric
Ddielectric separated by a conductor
#124
When frequency of an ac wave decreases, the value of Xl in a coil
Aapproaches zero
Bgets larger positively
Cgets larger negatively
Dstays constant
#125
The temperature-resistance coefficient of pure gold is
A0.0034
B0.0037
C0.0038
D0.0039
#126
The capacitor opposes any change in voltage across it by
Apassing a voltage proportional to the rate of change of current
Bacting as a short circuit at time equal to zero
Cpassing a current proportional to the rate of change of voltage
Dacting as a short voltage at time equal to infinity
#127
What is the most common non-sinusoidal waveform?
Asquare wave
Btriangular wave
Ctrapezoidal wave
Dsawtooth wave
#128
Which of the following capacitors is suitable for dc filter circuits?
Amica
Bceramic
Cpaper
Delectrolytic
#129
What is the reciprocal of capacitance?
Areluctance
Bsusceptance
Celastance
Dconductance
#130
The curve between current and frequency is termed as
Avoltage curve
Bgain curve
Cpower curve
Dresonance curve
#131
_____ can be used to estimate resonant frequency and to find reactance at any frequency for any value of capacitor or inductor.
ASmith chart
Breactance chart
Cimpedance chart
Dresonance curve
#132
For a parallel AC circuit, _____ is used as a reference phasor.
Avoltage
Bpower
Ccurrent
Dresistance
#133
For a series AC circuit, _____ is not used as a reference phasor.
Avoltage
Bimpedance
Ccurrent
Dresistance
#134
If a certain circuit has a current that is lagging the voltage by 45 degrees, then it displays
Apure inductive reactance
Bresistance and capacitive reactance
Cresistance and inductive reactance
Dpure capacitive reactance
#135
_____ is the maximum voltage that can be applied across the capacitor for very short period of time.
Aworking voltage
Bsurge voltage
Cstray voltage
Dpeak voltage
#136
Which of the following materials has the lowest dielectric strength?
Aglass
Bpaper
Cmica
Dteflon
#137
The distance between the capacitor plates increases two times, then its capacitance
Aincreases two times
Bincreases four times
Cdecreases two times
Ddecreases four times
#138
The ratio between the active power and the apparent power of a load in an ac circuit is called
Aquality factor
Bpower factor
Cpower ratio
Dpower reactive
#139
When the power factor of a circuit is zero,
Apower absorbed is maximum
Bpower absorbed is minimum
Cpower absorbed is zero
Dthe impedance is minimum
#140
How many degrees of phase represents one full cycle?
A360
B180
C270
D90

More Electrical Engineering topics